[Hardware Improved] Xhorse VVDI BIM Tool BIMTool Pro V1.9.0 Upgrade Version of VVDI BMW
![Trust Badge](https://techroute66.com/wp-content/uploads/2023/08/stripe-badge-grey.png)
![[Hardware Improved] Xhorse VVDI BIM Tool BIMTool Pro V1.9.0 Upgrade Version of VVDI BMW](https://techroute66.com/wp-content/uploads/2024/07/Hardware-Improved-Xhorse-VVDI-BIM-Tool-BIMTool-Pro-V1.9.0-Upgrade-Version-of-VVDI-BMW-60x60.jpg.webp)
[Hardware Improved] Xhorse VVDI BIM Tool BIMTool Pro V1.9.0 Upgrade Version of VVDI BMW
Description
Xhorse VVDI BIM Tool Pro Key Programmer Hardware Improved Edition V1.9.0
VVDI BIMTool Pro is the update version of VVDI BMW Tool, with enhanced edition for BMW, and it is an essential tool for automotive maintainers.
Highlights:
- Current software V1.9.0
- Coding and programming
- OBD Key Generation + Mileage Correction + Reading EEPROM
- Simultaneous/Reading Engine
- Ethernet port; supports 10/100M programming via Ethernet.
- Supports DoIP Vehicle/Module Programming
- Language: English, Italian, Spanish, Deutsch, Hungarian, Polish, etc.
- Supports BMW ECU programming (NBT/CIC) (connection via a network cable)
- Faster speeds for the F/G Chassis programming (connection via a network cable)
- Operating System: Compatible with WIN7 8 10 etc, no computer operating system limitation.
- Supports BMW E-sys and Rheingold Diagnostic System. Able to replace specialized devices. (connection via a network cable)
- Supports direct reading of ISN data without disassembling the ECU (N13/N20/N55/N63)
VVDI BIM Tool Pro Update Log:
(2023-08-10)
Require firmware V1.8.4
1. Unlock BDC module via OBDII. Easy and fast job(SWFL_00002419.085.xxx.xxx not support OBD)
2. Bugfix
Package List:
1pc * VVDI BIMTool Pro Main Unit
1pc * OBD Cable
1pc * Ethernet Cable
1pc * USB Cable
1pc * ECU Reflash Cable
1pc * Plastic Box
VVDI BIM TOOL Pro Using Notice
1. Notice Do not use the Internet Port and USB Port at the same time:
For FEM/BDC Program using the USB Port connect is ok.
For Others Program you can connect the Internet Port .
2. When connect the Port with PC, first it display”Booting”, after about 20 seconds it will display”BMW”
then the connect is ok.
Xhorse VVDI BIMTool Pro Functions:
1. E-Series programming, coding, DTCs
1). Support autodetect car chassis
2). Support scan all car units
3). Support calculate all configuration units
4). Support read/write car configuration(FA)
5). Support input HW/ZB number to programming
6). Support calculate default coding from FA
7). Support edit detail coding information, change car config
8). Support many languages DTC code
2. F-Series programming, coding, DTCs
1). Support autodetect car chassis
2). Support read/write car configuration(FA)
3). Support calculate programming files from unit, car, whold database
4). Support calculate default coding from FA
5). Support edit detail coding information, change car config
6). Support detail special function list from coding
7). Support many languages DTC code
3. CAS1/CAS2/CAS3/CAS3+/CAS3++ISTAP OBD key learning
1). Support read key information, write key inforamtion
2). Support key learning
3). Support read/write EEPROM
4). Support read ECU/gearbox synchronize codes
5). Support write ECU/gearbox synchronize codes
6). Support synchronize ECU and CAS
7). Support synchronize CAS and ELV
8). Support read ISN via OBDII
9). Support reset KM via OBDII
10). Support disable key/enable key
4. CAS4(1L15Y)/CAS4+(5M48H) OBD key learning
1). Support read CAS encrypt key via OBDII
2). Support key learning via programmer and via ignition switch
3). Support disable key/enable key
4). Support erase key position
5). Support reset KM via OBDII
6). Support read ISN via OBDII
7). Support backup/restore coding
8). Support update original CAS4 file
5. FEM/BDC OBD key learning
1). Support read FEM/BDC encrypt key via OBDII
2). Support key learning via programmer and via ignition switch
3). Support disable key/enable key
4). Support erase key position
5). Support reset KM via OBDII
6). Support read ISN via OBDII
7). Support backup/restore coding
8). Support exchange used FEM/BDC
9). Support close/open transport mode
10). Support reset ECU lock
11). Support switch on ignition without working key
6. CAS EEPROM dump key learning
1). Support EWS1, EWS2, EWS3, EWS4, CAS1(0K50E), CAS2(2K79X), CAS3(0L01Y), CAS3+(0L15Y), CAS3++ISTAP(0L15Y, 0M23S)
2). Support prepare dealer key via programmer
3). Support disable key/enable key
4). Support read ISN from working key
7. 8HP Gearbox renew
1). Support clear ISN in 8HP gearbox
2). Support backup/restore coding
3). Support reset adaptation information
8. Read synchronize code from E-Series ECU: Support MEV9N46L, MSV70, MSS60, MS450, N62 etc
9. Read E-Series/F-Series ECU ISN via OBDII
1). Support MSV80, MSV801, MSD80, MSD81, MSD802, MSD812, MSD851
2). Support MED17xx/MVD17xx/MEVD17xx/MV1722
3). Support MED172/MEV17N46/ME17N45
4). Support MEVD172Y/MEVD172/MEVD1725/B38/X63TU
10. Support exchange ECU and CAS
1). Support write ECU ISN via OBDII
2). Support write ECU VIN via OBDII
3). Support change ECU ISN and VIN with EEPROM dump
4). Support chagne CAS1/CAS2/CAS3/CAS4 ISN and VIN with EEPROM dump
11. CAS repair (OBD&EEPROM)
1). Support repair ISTAP CAS
2). Support repair CAS EEPROM(Service mode EEPROM), you can start engine after repair the file (CAS1,CAS2,CAS3,CAS3+,CAS3++ISTAP)
12. CAS3+/CAS4+ lost all dump file support restore ISN and VIN
1). Support CAS3+(1L15Y) encrypt version
2). Support CAS3++(ISTAP) version
3). Support CAS4+(5M48H) version
13. File KM calibration
1). Support EWS1, EWS2, EWS3, EWS4
2). Support CAS1(0K50E), CAS2(2K79X), CAS3(0L01Y), CAS3+(0L15Y, 0M23S)
3). Support CAS4(1L15Y), CAS4(5M48H, 1N35H)
4). Support E-Series dashboard EEPROM(M35080)
5). Support F-Series dashboard EEPROM(35160, 35128)
14. Unlock HITAG2 key: Support lock hitag2 key made from BMW TOOL via programmer
15. EWS3/EWS4 can read EEPROM, write EEPROM via CAS PLUG
BIMTool Pro Parameters
Power 1W
USB Interface USB 2.0
Extra Power 12V/2A
Working temperature -20~70℃(-4~158°F)
Store temperature -40~80℃(-40~158°F)
Item dimension 146*85*30mm
Package dimension 355*283*87mm
Net weight 0.21kg
Gross weight 1.6kg
VVDI BIMTool Pro Software Display:
Xhorse VVDIBIM PRO vs VVDI BMW
Item | VVDI BIMTOOL Pro | VVDI BMW TOOL |
IMG | ![]() |
![]() |
Remark | In stock | Out of stock |
Language | Chinese, English, Italian, Spanish, German, Hungarian, Polish | Chinese, English, Italian, Spanish, German, Hungarian, Polish |
Program E/F chassis | Yes | Yes |
Code E/F chassis | Yes | Yes |
Learn OBD key | Yes
for CAS1 / CAS2 / CAS3 / CAS3+ / CAS3+ ISTAP / CAS4 / CAS4+ |
Yes
for CAS1 CAS2 CAS3 CAS3+ CAS3+ISTAP CAS4 CAS4+ |
File make key | Yes
for CAS1 CAS2 CAS3 CAS3+ ISTAP CAS4 CAS4+, etc. |
Yes
for CAS1 CAS2 CAS3 CAS3+ ISTAP CAS4 CAS4+, etc. |
Gnerate key for FEM/BDC system | Yes | Yes |
Correct mileage | Yes
for CAS1 CAS2 CAS3 CAS3+ ISTAP CAS4 CAS4+ and FEM / BDC system |
Yes
for CAS1 CAS2 CAS3 CAS3+ ISTAP CAS4 CAS4+ and FEM/BDC system |
Read EEPROM & synchronous code data | Yes
for CAS1 CAS2 CAS3 CAS3+ |
Yes
For CAS1 CAS2 CAS3 CAS3+ |
Get ECU ISN | Yes | Yes |
Support synchronous ECU and CAS, synchronous ELV and CAS | Yes | Yes |
Reset 8HP gearbox in F chassis | Yes | Yes |
Exchange ECU and CAS | Yes | Yes |
Add ethernet port | Yes, support 10/100M programming via Ethernet | No |
WiFi | Yes, WIFI 802.1b/g, 150Mbps high-speed connection, and WIFI OTA upgrade | No |
DoIP Vehicle/Module Programming | Yes | No |
BMW ECU programming (NBT/CIC) | Yes, connect via network cable | No |
Speed up the F/G Chassis programming | Yes, connect via network cable | No |
BMW E-sys and Rheingold Diagnostic System | Yes, able to replace the specialized devices (connect via network cable) | No |
Read N13/N20/N55/N63 ISN data without disassembling | Yes | No |
Package Includes:
1pc x BIMTool Pro main unit
1pc x USB cable
1pc x network cable
1pc x OBD cable
1pc x ECU Reflash cable
1pc x Plastic box
If you have any pre-sale question or need help with your purchase, feel free to reach out to our team:
Email: [email protected]
Mobile (WhatsApp): +447441395648
We always love to hear from our customers.
Rating & Review
There are no reviews yet.